Zur Sprachwahl / back to language menu
HAVER & BOECKER
VERTICAL MOUNTINGS
FOR OTHER MESH TYPES
For wire cloth specifications made from solid wires or other mesh types we offer a variety of tensioning systems. Depending on the dimensions of the panels intermediate mountings need to be included into the system besides the regular top and bottom mountings.
TOP MOUNTING
A flat tension profile (tension strip) is equipped with clevis bolts. Using the bolts the mesh element is suspended into the substructure. At the same time the bolts are used to apply tension at the top mounting point.
INTERMEDIATE MOUNTING
With proper opening sizes wire cloth elements can be mounted with wire connectors, which wrap around a tube, that is located behind the mesh. The connectors interlock with the mesh from the back. Standing in front of the element this mounting system is almost invisible.
BOTTOM MOUNTING
For bottom mountings the use of flat tension profiles is recommended. Proper tensioning is achieved with clevis screws that are attached to the flat tension profile.
Especially in exterior applications structural characteristics require the use of additional pressure springs. They lend sufficient elasticity to the mesh when exposed to respective loads.
YOU ARE HERE: Applications & Products - Architectural wire mesh - Mounting Systems - Vertical Mountings